P5: A 1922 NUT Works Racer Returns to British Soil


Words + Photos: Rich Orriss


The NUT motorcycle marque has its origins in Newcastle upon Tyne, where Hugh Mason and Jock Hall began producing motorcycles in the years before the First World War. Taking its name from the initials of Newcastle upon Tyne, NUT quickly established a reputation for building some fantastic sporting machines with Mason securing victory in the 1913 Junior TT on the Isle of Man. Although the company remained a relatively small manufacturer, competition was central to its development, and NUT machines were regularly seen in the hands of enthusiastic privateers and works riders.

During the early 1920s, the company made a determined effort to establish itself in top-level motorcycle racing. Six special works racers were constructed, each fitted with a highly developed 500cc JAP V-twin engine. These were far removed from the standard touring motorcycles of the period, and incorporated a number of modifications intended to extract greater performance from the relatively small-capacity engines.

The racers however were not much of a success, and only one of them made it to the 1922 Isle of Man Senior TT, where it was entered for rider Robin Bownass.

Bownass made a promising start during practice, recording a lap of 47 minutes and 32 seconds in the second week, placing him second only to Freddie Dixon on his Indian. By the Saturday, he had improved his time to 42 minutes and 38 seconds, making him the sixth-fastest rider in practice. It was an impressive performance, particularly considering that he was competing against some of the most established names in motorcycle racing, including Graham Walker and George Dance.

Unfortunately, the race itself proved less successful. Bownass suffered mechanical trouble, requiring repairs after a tumble at Quarter Bridge. Further problems followed, and on the second lap he was forced to retire at Sulby after the steering column broke. It was a disappointing conclusion to what had initially looked like a promising TT appearance.

The NUT you see here is the sole remaining survivor of the six factory bikes, and who knows, could have been the one that smashed around the Isle of Man over 100 years ago. It is now owned by our pal Tom from Belgium, who has a particularly good taste for a nice old motorcycle. The sequence of frame numbers ran from P1 to P6 – this one is P5.

An Unusual JAP Racing Engine

At the heart of the machine is its 500cc JAP V-twin – a specially developed racing engine which differs considerably from the more familiar touring units produced by the Tottenham manufacturer.

Although JAP supplied V-twin engines to numerous motorcycle manufacturers, this particular racing unit was an altogether more specialised affair. Unlike the conventional touring engines, the racing motor employed a twin-cam arrangement, external valve lifting, hollow tappets, and valves the same size as the later 700cc engine.

The engine also featured lightened flywheels and connecting rods, while considerable attention had been paid to reducing the weight of the valve gear. A TT-pattern AMAC carburettor and Thompson-Bennett magneto completed the racing specification.

Perhaps one of its most distinctive features was the arrangement of the cylinder heads – the racing motor featured two “fir cones”, where as the standard engine had one, the spark plug taking up the other space. Note the positioning of the spark plugs off to one side – a feature which distinguished the racing engine from its more conventional relatives.

Such modifications reflected the considerable experimentation taking place in motorcycle racing during the period. Manufacturers were still exploring different methods of extracting performance from relatively simple engines, often with considerable ingenuity and varying degrees of reliability.

The Survival of a Works Racer

The history of this NUT is not entirely clear. What is known is that the machine was once in the hands of Peter Sparkes, who undertook an extensive restoration during the late 1970s and early 1980s. The restoration was documented in the September 1985 edition ofย The Classic Motor Cycle, in an article written by Tim Holmes under the titleย A Cracking NUT.

Sparkes had become particularly interested in the history of the six NUT works racers, carrying out considerable research into their origins and subsequent whereabouts. His investigations included correspondence with former NUT employees and others associated with the marque, eventually producing a substantial collection of information.

Among the material uncovered were the diaries of W. C. Thompson, who had worked for NUT between 1919 and 1926. These snippets of information provided an important insight into the companyโ€™s racing activities during the period.

The restoration itself was no small undertaking. The motorcycle had survived in a poor state, with numerous components requiring repair or replacement. The JAP engine was particularly troublesome, having suffered considerable internal wear. The cylinder barrels were badly worn, and even the tappets required replacement. Two of the fir-cones were missing, so replacements were cast using the remaining ones as patterns. The Sturmey-Archer gearbox was another area requiring considerable work. It would appear that it had succumbed to water damage, with Sparkes eventually having to manufacture a replacement casing using the damaged original as a pattern.

One of the more difficult jobs involved the girder forks. Rather than simply replacing the damaged tubing, Sparkes was faced with the complicated task of dismantling the original assemblies, removing the old tubes and manufacturing suitable replacements. The work proved considerably more involved than anticipated, with alignment and the unusual construction of the forks presenting further difficulties. The handlebars also required attention. Although relatively straightforward in appearance, their unusual dimensions meant that reproducing them accurately was another challenge.

Another nice touch by Sparkes was the exhausts. The bike had come with bayonet caps to slot over the end of the pipes. This would make the NUT suitable for taking through small villages, where the louvres provided some sound deadening. Once removed, the bike was in “race-mode” to allow the exhaust gasses to scream straight through the system.

After approximately twelve years of work, the restoration was finally completed, allowing the NUT to return to the road. It was a remarkable achievement, particularly considering the scarcity of original components and the limited information available about these specialised racing machines.

Back Across the Channel

Today, the NUT belongs to Belgian enthusiast Tom, who brought the machine to the inaugural Still Kicking event at Bottisham Airfield Museum in 2026.

With the event bringing together a considerable gathering of pre-war motorcycles, Tom felt it would be appropriate to bring a British machine back across the Channel. The NUT was an ideal choice, particularly given its racing history and the fact that so few examples of these early works machines have survived.

Among the many motorcycles attending Still Kicking, the NUT was certainly one of the more unusual. Its compact V-twin race engine, purposeful riding position and unmistakable competition origins set it apart from the more conventional road machines.

As is often the case with motorcycles of this age, however, getting everything running correctly proved to be part of the experience.

The JAP engine was initially running on only one cylinder, leaving Tom with a little work to do before it could perform as intended. Fortunately, he was surrounded by the right sort of people, and it wasnโ€™t long before others around the camp became involved.

With tools out and a few spanners put to good use, Tom and other enthusiasts set about investigating the problem. After some attention, they succeeded in getting the second cylinder firing, bringing the V-twin back to life on both cylinders.

Image Credit: Phil Meggett

It was the sort of scene that makes events such as Still Kicking so enjoyable. Rather than being confined to static displays, these motorcycles are brought together to be ridden, maintained and occasionally repaired in the field, much as they would have been during their working lives.

For a motorcycle which had once competed at the Isle of Man TT, survived decades of uncertain history and undergone an extensive restoration, a little attention with the spanners was hardly out of character.

Still Kicking After More Than a Century

The NUT works racers represent an interesting period in British motorcycle competition, when relatively small manufacturers could still challenge the established names through clever engineering and determined riders. The 1922 Senior TT was ultimately unsuccessful for Robin Bownass and his NUT, but the practice laps showed how capable these machines were. It is nice to see that in Toms hands, this bike which could have been the TT racer is still out being run and ridden.

And for those who were at Still Kicking in 2026, the sight of a rare British works racer receiving a little attention in the field before firing once again on both cylinders was a reminder of what these events are all about.

A cracking NUT indeed.



If you would like to be kept up-to-date with the latest news and information on vintage motorcycles, feel free to sign up to our newsletter, which we aim to ping out each month.



Leave a Reply

Proudly powered by WordPress | Theme: Baskerville 2 by Anders Noren.

Up ↑